1. Cold Rolling Division

Cold Rolled Strips & Sheets

Capacity:

  • Capacity 230,000 TPA

Technical Data:

  • Thickness (mm) : 0.15 to 3.50
  • Width (mm) : 15 to 750 (Max)
  • Coil Weight (MT) : Up to 12 MT (7 to 18 kg/mm width)
  • Surface Finish : Super Bright, Bright, Dull & Matte.
  • Grades Specification : As per JIS/BIS/ASTM/DIN/EN Standards

With 4 Hi-Reversible Cold Rolling Mill of 0.15 MM to 3.5 MM thickness range and Auto Gauge Control, we have facility to manufacture the products which are highly suitable for the purpose of Automakers and large numbers of Automotive Parts and White Goods parts manufacturers apart from General Engineering Industry.

The 100 % Hydrogen Based Bell type Annealing Furnaces produces one of the best quality of Cold rolled Steel for any kind of drawing applications. Also, it enhances the finish of the material specifically for the bright finish, thus enabling us to acclaim it Mirror Bright. However, we have Skin Pass facility for Matt, Bright and Super Bright finish also.

In today’s competitive scenario where manufacturers are supposed to deliver cost effective quality products, it becomes very important for us to produce sizes at minimum tolerances to zilch on wastage. Thus, keeping in view of the above, we had installed Cold Rolled Slitting Line with a minimum capacity to slit 15MM Slits of Cold Rolled Steel Coils and Cut to Length with Auto Stacker with maximum length variation of 0.50MM for Cold Rolled Steel Sheets.

HR/HROP/HROPSP Strips & Sheets

The base raw material of Hot Rolled Steel Coil is also used as finished good after pickling, slitting and cut to length of particular size for structural, general engineering and automotive purpose. We have installed a capacity of slitting and cut to length along with auto stacking to meet the above segment along with Push Pull Pickling Line with a range capacity of 1.60 MM to 8.00 MM.

2. Precision Tube Division

Capacity:

  • Capacity 75,000 TPA

Technical Data:

  • Diameter (mm) : 12.70 to 127 mm
  • Thickness (mm) : 0.35 to 6.00 mm
  • Length : 50 to 7000 mm
  • Grades Specification : IS & All International Standards

The Precision Tube Mill is equipped with High Frequency Solid State Welder and Cold Saw to provide best welded and burr free tube of Bending, Full flat & Flaring quality for automotive applications along with furniture and general engineering purposes. The Mill is outfitted with design to cater to Outer Dia of Tube from 12.70 to 127 mm and Thickness range of 0.35 to 6.00 mm.

Also we have installed SOCO Auto Cutting and Champhering Machines with maximum length variation of 50 to 7000 mm.